Koran And Women Essays (1857 words) - Women In Islam,

Koran And Women The Korans Attitude Towards Women The Koran is a book following the religion of the Muslim people. In it, many aspects of their ways of life and their attitudes towards different people are addressed. It mentions the strong feelings of the true believers towards Jews and Christians, however it gives a view of women that is taken two ways. A major part of their religion is the way women should be treated. This idea is a controversial topic as seen from a person that is not a true believer, or a Muslim. Conventional thinking brought out by the media have led non-Muslim people to perceive the treatment of women as suppressive. The Koran shows the reader both sides of the coin, and therefore, the reader must form an opinion of the way they thing women are treated. After reading The Koran, one would think that it belittles women, such as the way they are treated, and the role they play in society. However, with respect to their society habits, rituals, ways of life, and their religion, Muslim women are actually treated wi th more respect, and with more decency. The people of the book have very strict ideas about how society is to be run based upon their religion and culture. They are given certain rules and are expected to follow them. They have a proper understanding of how they are to live their life and how they are to treat other people. In the case of women, The Koran is very specific when it comes down to how they are to be treated and their role in life. Women shall with justice have rights similar to those exercised against them, although men have a status above women. As long as you are not a true believer, you will never really know what this exactly means. Obviously in The Koran, men have more rights than women. But then how is this statement to be understood? In The Koran, men and women have rights that are far more gender bias; men are guided more towards money and power, while women are guided towards a family and the home. It is a society in which the woman is in charge inside of the house while the man has more power outside . People would think of this as degrading towards women, but it is done to look after them. As a protection to women, men are forced to go outside of the house into the world that is cold and evil. They are told that they must do this everyday and bring home money to provide for their family and wife. The woman is to stay home in a safe place and take care of what she knows best. This is not mean to make women feel inferior but to make them feel safe and free from the world. There are many reasons why people believe that women are treated without respect in the Islamic nations. First and foremost, it says in The Koran that women may be beaten: Men have authority over women because God has made the one superior to the other, and because they spend their wealth to maintain them. Good women are obedient. They guard their unseen parts because God has guarded them. As for those from whom you fear disobedience, admonish them, forsake them in beds apart, and beat them. Then if they obey you, take no further action against them. (64) Many people see this as wrong, but why? It is clearly stated in the Islamic religion that women may be beaten if they are disobedience. Why then, would a woman do something defiant if she knows that she will be hurt? She should realize that she must be a true believer and not be insubordinate; and if she is, then she must realize that she did something wrong, and according to her religion, she must be punished. She will know that she has done something wrong, and unfortunately will get beaten; however, if she is smart, she will know not to do it again and obey her husband. Another point that is stated in The Koran is that if a woman feels like she is being treated unfairly by

Sample of a to Page Essay About Expectations Personally and Professionally

Sample of a to Page Essay About Expectations Personally and ProfessionallyIn order to answer the question, 'What is a sample of a two-page essay about expectations personally and professionally,' one needs to find out what the purpose of the two-page essay is in the first place. This essay can be used to answer the question, 'What do you expect from your future in the profession of your choice?' If you are not familiar with what career one would like to pursue, this might seem like a daunting task.It is actually not so much about the personal and professional needs, but more about how we wish to get the desired results in the most cost effective manner. So, what are the objectives that can be addressed in order to get the desired results? Well, we can look at the following samples to see the answers to this question. The most popular sample that has been given to students is the sample of a two-page essay about expectations personally and professionally.This sample provides an insigh t into the basic areas and the aspirations of the student. Of course, it would not be appropriate to make a generalization on the sample as it is given for a specific purpose only, but this may give us a fair idea about what the sample is about.There are four parts to the sample: Introduction, Personal Goal Statement, Prospects, and Career Objectives. In the Personal Goal Statement section, the student has to write down a personal statement that includes their job and the purpose behind the writing of the paper. In the Prospects section, the student has to outline the factors that would help them in reaching their goals.Next, in the Career Objectives section, the student has to list the career objective that they have in mind for the future. The Career Objective section is followed by the Personal Goal Statement section. Then the student should go over the Career Objectives.The last section in the sample is an exercise and can be taken up by the student and followed. It is important to note that if the student is not happy with the papers that he has written, he has the option of revisiting the essay.The sample has to be used as a guide, not as a final sample. If the student has the requirement to revise the papers, then he is free to do so. The aim of this is to help the student in setting up his/her own 'two page essay about expectations personally and professionally.'

Guanlong Tyrannosaur Facts and Figures

Guanlong Tyrannosaur Facts and Figures Name: Guanlong (Chinese for crown dragon); pronounced GWON-long Habitat: Woodlands of Asia Historical Period: Late Jurassic (160 million years ago) Size and Weight: About 10 feet long and 100-200 pounds Diet: Meat Distinguishing Characteristics: Small size; large crest on head; possibly feathers About Guanlong One of the earliest tyrannosaurs yet to be discovered, Guanlong (the name, crown dragon, alludes to this meat-eaters prominent crest) roamed eastern Asia during the late Jurassic period. Like other early theropods - such as Eoraptor and Dilong - Guanlong was nothing special in terms of size, only a fraction as large as Tyrannosaurus Rex (which lived about 90 million years later). This points to a common theme in evolution, the development of plus-sized animals from small progenitors. How do paleontologists know that Guanlong was a tyrannosaur? Clearly, this dinosaurs crest - not to mention its fairly long arms and (possibly) its coat of feathers - make it an ill-fitting match with the classic tyrannosaurs of the late Cretaceous period. The giveaway is the characteristic shape of Guanlongs teeth and pelvis, which point to its being a basal (i.e., early) member of the tyrannosaur family. Guanlong itself appears to have descended from earlier, smaller theropods known as coelurosaurs, the most prominent genus of which was Coelurus. Oddly, when Guanlong was discovered, in Chinas Shishugou formation, the paleontologists from George Washington University found two specimens lying on top of one another - one surmised to be about 12 years old, and the other about 7. Whats weird is that, as far as researchers can tell, the dinosaurs didn’t die at the same time, and theres no sign of a struggle - so how did they wind up buried together? Its still a tantalizing paleontological mystery.

Essential Tips for Producing Great News Features

Essential Tips for Producing Great News Features A news feature is a kind of story that focuses on a hard-news topic. News features combine a feature writing style with hard-news reporting. Here are a few tips for producing news features. Find a Topic Thats Doable News features typically try to shed light on problems in our society, but many people doing news features for the first time try to tackle topics that are just too large. They want to write about crime, or poverty or injustice. But books- indeed, hundreds of books- can and have been written about subjects so broad. What you need to do is find a narrow, focused topic that can be covered reasonably well in the space of a 1,000-to-1,500-word news feature. Want to write about crime? Focus on one particular neighborhood or even a specific housing complex, and narrow it down to one type of crime. Poverty? Pick a particular kind, whether its homeless people on the streets of your city or single mothers who cant feed their kids. And again, narrow your scope to your community or a neighborhood. Find Real People News features tackle important topics but theyre still like any other kind of feature- theyre people stories. That means you have to have real people in your stories who will bring the topic youre discussing to life. So if youre going to write about homeless people youll need to interview as many as you can find. If youre writing about a drug epidemic in your community youll need to interview addicts, cops and counselors. In other words, find people who are on the front lines of the issue youre writing about, and let them tell their stories. Get Plenty of Facts and Stats News features need people, but they also need facts and plenty of em. So if your story claims there is a methamphetamine epidemic in your community, you need to have the facts to back that up. That means getting arrest statistics from cops, treatment numbers from drug counselors, and so on. Likewise, if you think homelessness is on the rise, youll need numbers to back that up. Some evidence can be anecdotal; a cop saying hes seeing more homeless people on the streets is a good quote. But in the end, theres no substitute for hard numbers. Get the Expert View At some point, every news feature needs an expert to talk about the issue being discussed. So if youre writing about crime, dont just talk to the beat cop: interview a criminologist. And if youre writing about a meth epidemic, talk to meth users, yes, but also interview someone whos studied the drug and its spread. Experts lend news features authority and credibility. Get the Big Picture Its crucial to have a local focus for a news feature, but its also good to give a broader perspective. So if youre writing about homelessness in your town, try to find some stats on homelessness nationwide. Or if your story is on a local meth epidemic, find out if other cities around the country are seeing the same thing. This big picture kind of reporting shows that theres a larger context to the issue youre writing about. As for finding national statistics, federal government agencies crunch numbers on virtually every aspect of our lives. So check out their websites.

Valuation Research Paper Example | Topics and Well Written Essays - 3250 words

Valuation - Research Paper Example Coca-Cola Corporation has introduced more than 500 brands and some of the renowned brands are Coke, Diet Coke, Caffeine Free Coca-Cola and Coca-Cola Zero. The company has its presence in more than 200 countries of the world and is more renowned as Coke. More than 1.7 billion people are served every day with the products of Coca-Cola.1 PepsiCo, Inc. (or â€Å"PEP)† is another American based multinational enterprise that operates in the food and beverage industry. Headquarter of PEP is in Purchase, New York. The company was formed in 1965 and since that time it has expanded its brands to more than 200 countries. PEP is the fifth largest food and beverage company in the world in terms of total revenue however in the North American region it is the largest company. There are more than 285 thousand employees working for PepsiCo around the world.2 Food and beverage industry includes food production, distribution, retailing and catering of food and beverages. The total value of this industry in the year 2008 was $5.7 trillion. The growth rate of the industry is expected to increase at a CAGR of 3.5% and it is estimated that the total value of this industry would reach up to $7 trillion by the end of 2014.3 As other industry suffered because of financial crisis, food and beverage industry was also one of the victims of recession. The industry was affected and companies in the industry had to face different problems like increase in food prices, increase in transportation cost and a reduction in consumer spending thus, reducing the profitability of the companies in the industry. PepsiCo is the fifth most important company in this industry with offering different products like snacks, carbonated and non-carbonated drinks. The total revenue of PepsiCo is $43.3 billion USD with a net profit of $5.1 billion. Coca-Cola Corporation is considered to be the seventh most important company in the industry with

Public Budgeting Essay Example | Topics and Well Written Essays - 500 words - 2

Public Budgeting - Essay Example Both the legislature and executive are significantly involved in the system practice. Performance budgeting system is implemented to successfully to enforce constant requirements on agencies. The Agencies must explain in event of significant failure ranging from 10 percent or more to adhere to set performance targets (Clynch 2006). The performance based system of budgeting is very effective in a real practical scenario. Especially in public administration where for every input- tax payer’s money- they expect tangible results. Performance based budgeting plays a massive role in influencing operations effectively and efficiently. The system in itself is inherent with small economic departmental unit accountability. The single unit performance assessment style results in differentiated system. This differentiation is vital since public agencies always undergo through many procedures before finalizing an actual budget execution phase. Post-execution analyses time is also shortened through the performance based budgeting system (Clynch 2006). The whole practice involves the co-collaboration of different departmental bodies within the government. This collaboration is essential for more than just budget preparation procedure, negotiation procedures and approval processes. The coordinative collaboration of departments is important in approval of values to be allocated in order to attain defined goals after the finalization of the budgeting (Kelly 2003). The system`s advantage revolves around its rational methodology of budgeting. Whenever an organization defines the amount to allocate to a department or activity, it considers the costs against benefits for each funding level. If there is no justification for the spending the amount is reduced. The system links objectives to outcomes. A body that practices performance budgeting uses performance management (Clynch 2006). When management

Importance of Site Investigation for Development

Importance of Site Investigation for Development Lolita Misjune Contents (Jump to) Case study Introduction Objectives of the site investigation Procedure Benefits of a Desk Study and ground investigation In-situ test Cone penetration test Laboratory testing Calculations Soil profile Introduction The land on which development takes place has the fundamental influence on the behaviour of the structure which it supports and risks to which the future owners, users and occupiers will be exposed. The adequate investigation of any site is essential to the design of safe and economic foundations and to the detection of any contamination which may be present, with the associated responsibilities for control, protection or removal. Objectives of the site investigation To find out if the site and environment are suitable for target it has been determined. To provide adequate economical and commercial requirements as well as temporary works design. Plan and investigate the best way of construction and what materials are necessary. Predict physical or chemical changes which may occur during work process in site. If there are several possible ways suggest best. Design ways which may cause failure. Procedure The sequence of a site investigation is as follows: Planning Desk Study Site Reconnaissance/ Walk over survey Desk study/Preliminary information An important part in soil investigation is desk study. Collecting preliminary information is invaluable in assessing the requirements of a ground investigation for both environmental and geotechnical purposes. Well performed desk study helps in formulation of investigation work, pointing explicit places of contamination or geotechnical parameters. A well, executed desk study can help to formulate investigation work, targeting specific areas of contamination or geotechnical parameters, concluding in a cost effective and aimed investigation. Site assessment Site inspection Ground investigation Preliminary ground investigation Assessment Main ground investigation Laboratory testing Benefits of a Desk Study and ground investigation Mitigate/minimise risk Understanding of potential variations in ground conditions Can lead to economical design of foundations / geotechnical structures Reduce likelihood of unforeseen ground conditions Reduce chances of delays on site Quantify / qualify risk Accurate forecast of budgets In ground investigation it is possible to design and conduct geotechnical and environmental investigation. Ground investigation work is conducted closely together with clients and engineering team to discuss and provide a cost effective program of exploratory work. There is wide range of exploratory methods available for site ground investigation. Trial Pitting Window Sampling and Dynamic Probe Testing Cable Percussive Boreholes Rotary Drilled Boreholes Laboratory Testing Site work is followed by both geotechnical and chemical testing. For ground investigation in given situation could be used Cable Percussive Boreholes. These are appropriate for most projects. Cable percussive boreholes are a usual method of site investigation. This method offer a cost effective way of drilling within a range of soils varying from low strength alluvium to very stiff over consolidated clays, very weak to weak rock and dense granular soils. Cable percussive boreholes are also proficient of proceeding boreholes in different Made Ground soils, containing engineered fill and landfill materials where obstructions may come across. Using this method can be achieved 50m borehole. Drilling and trial pitting are normally carried out for a number of reasons, such as: to establish the general nature of the strata below a site to establish the vertical or lateral variability of soil conditions verify the interpretation of geophysical surveys to obtain samples for laboratory testing to allow in situ tests to be carried out to install instruments such as piezometers, or extensometers. In-situ test That testing is valuable for soil property information, gaging groundwater pressure, gathering moisture content data and other important data points. In-situ soil testing can be done in a variety of different ways. Depending on place and aim of analysis each test has its own benefit. That is very important for cost effectiveness and data preciseness to determine what test is appropriate for you. In the UK in situ testing is carried out when: Good quality sampling is impossible (for example, in granular soils, in fractured rock masses, in very soft or sensitive clays, or in stoney soils) the parameter required cannot be obtained from laboratory tests (for example, in situ horizontal stress); when in situ tests are cheap and quick, relative to the process of sampling and laboratory testing (for example, the use of the SPT in London clay, to determine undrained shear strength); and most importantly, for profiling and classification of soils (for example, with the cone test, or with dynamic penetration tests). Options for In-Situ Soil Testing Procedures Astandard penetration test Acone penetration test A piezocone penetrometer probe A flat plate dilatometer test Etc. Cone penetration test However, the most precise anddetailed in-situ soil testing for determining a wide variety of technical data is Cone Penetration Testing (CPT), for this reason I would carry on this test in given situation. This test is dynamic, cost effective and has been broadly accepted as a simplified solution that provides useful information. Laboratory testing Laboratory testing is part of the physical survey. As an essential part of site investigation, the need for laboratory tests will often dictate the type and frequency of sample to be taken, and will therefore control the method of forming boreholes In laboratories can be done wide variety of tests which can`t be done in site, however economical side of investigation has an important role. For example more complex tests require a longer testing time and for reasons of time and economy these tests are carried in laboratories. During test can be measured both – direct properties of soil or index properties used to deliver useful information about the soil without taking any direct measurements of property. Laboratory tests are such as Atterberg limits California bearing ratio Hydraulic conductivity tests Expansion Index test etc In given example one used was falling head permeameter test, from results of that were calculated hydraulic conductivity and permeability cofficient. Calculations After performing permeameter test in order to find the vertical permeability of the sand were calculated coefficient of permeability and hydraulic conductivity. L: the height of the soil sample column A: the sample cross section a: the cross section of the standpipe Δt: the recorded time for the water column to flow though the sample h1= hydraulic head on specimen at time t1, cm, h2= hydraulic head on specimen at time t2, cm Nd: number of potential drops Nf: number of flow channels Nd=11-1=10 Nf=3*2=6 Soil profile In soil science and assessment key concept is soil profile. Knowing soil profile helps to investigate processes that have taken in soil development, assess soil features and types of soil which appear and is foundation for their classification. Scientists have developed methods to define the various components and characteristics of the soil profile. Soil profile helps to predict how the soil might be used By using common terminology, soil profile descriptions are valuable for deciding how the soil might be used and/or predicting how the soil might react to its intended use. Soil profiles, a more scientific test, evaluate three critical aspects of the soil that may have the potential to cause an on-site sewage system to malfunction. The texture of soil in area of the proposed on-site sewage system The presence or absence of water saturated soils The depth to an impervious soil layer (rock) All three parameters are used to design the most appropriate on-site system for your property. Bag samples of the predominant soil types encountered shall be collected from selected soil profile borings to provide specimens for engineering classification, moisture-density (standard or modified Proctor), and California bearing ratio (CBR) testing. These samples also consist of soil cuttings generated by the augering process. Care should be exercised not to combine different soil types for the same bag sample. Samples that will be used for a combination of classification, moisture-density, and CBR testing shall be a minimum of 50 pounds. One of methods of determining soil profile is cone penetration method. CPT truck is fast and low-cost method to conduct subsurface examination. Results are available directly, allowing on the fly mapping of stratigraphy and other subsurface features. A CPT sounding is made by pushing a small probe into the ground. Typically, a 3.6-centimeter-diameter probe (cone) is pushed into the ground to depths ranging from 15 to 30 meters. The cone is advanced downward at a constant velocity of 2 centimeters per second, using hydraulic rams that apply the full 23-ton weight of the CPT truck to push the probe rods to depth. In typical CPT soundings, the resistance to penetration is measured. Continuous measurements are made of the resistance to penetration of the tip and the frictional sliding resistance of the sleeve of the cone. Report Preliminary report or feasibility study Planning of main Preliminary report Financial report (Return of investment) Final report Lolita Misjune March 2015